Brother International Innov-ís 40 Users Manual - English - Page 74
then move the fabric to follow the pattern.
View all Brother International Innov-ís 40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Hold the quilting foot in place with your right d hand, and then tighten the presser foot holder screw using the enclosed screwdriver in your left hand. Use both hands to stretch the fabric taut, and h then move the fabric to follow the pattern. Reinforcement stitches are sewn at the beginning and end of stitching. a CAUTION ● Be sure to securely tighten the screw with the enclosed screwdriver, otherwise the needle may touch the presser foot, causing it to bend a Pattern • Reverse stitches cannot be sewn when the 3 feed dogs are lowered. or break. After sewing is finished, slide the feed dog i position switch to its original position to raise Slide the feed dog position switch, located at e the rear of the machine on the base, to the the feed dogs. position shown below to lower the feed dogs. a a Feed dog position switch (as seen from the rear of the machine) Turn on the machine. f With the pattern selection dial, g select stitch or . • The feed dogs are normally left raised. Memo ● Turn the handwheel to raise the feed dogs. 73