Brother International MFC-9340CDW Quick Setup Guide - English - Page 17
Finish and restart - lan cannot be found
View all Brother International MFC-9340CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Wired Network Windows® c Choose Wired Network Connection (Ethernet), and then click Next. NOTE To install the PS driver (BR-Script3 printer driver), choose Custom Install, and then follow the on-screen instructions. d When the Firewall/AntiVirus detected screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next. If you are not using the Windows® Firewall, see the user's guide for your software for information on how to add the following network ports: For network scanning, add UDP port 54925. For network PC-Fax receiving, add UDP port 54926. If you still have trouble with your network connection, add UDP ports 161 and 137. e The installation will automatically continue. The installation screens appear one after another. If prompted, follow any on-screen instructions. IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few minutes for all screens to appear. NOTE • If prompted, choose your machine from the list, and then click Next. • If your machine is not found over the network, confirm your settings by following the on-screen instructions. • If there is more than one of the same model connected on your network, the IP Address and Node Name will be displayed to help you identify the machine. • You can find your machine's IP address and the Node Name by printing out the Network Configuration Report (see Print the Network Configuration Report on page 39). • If the Windows Security screen appears, select the check box and click Install to complete the installation correctly. f When the On-Line Registration screen appears, make your selection and follow the on-screen instructions. Once you have completed the registration process, click Next. g When the Setup is Complete screen appears, make your selection, and then click Next. 18 Finish and restart a Click Finish to restart your computer. After restarting the computer, you must log on with Administrator rights. NOTE • If an error message appears during the software installation, do one of the following: - For Windows® XP, Windows Vista® and Windows® 7 users: run the Installation Diagnostics located in (Start) > All Programs > Brother > MFC-XXXX LAN (where MFC-XXXX is your model name). - For Windows® 8 users: to run Installation Diagnostics, double-click the (Brother Utilities) icon on the desktop, and then click the drop-down list and select your model name (if not already selected). Click Tools in the left navigation bar. • Depending on your security settings when using the machine or its software, a Windows® Security or antivirus software window may appear. Please allow or permit the window to continue. 17 Windows® Macintosh Wired Network