Brother International MFC-9340CDW Quick Setup Guide - English - Page 19

Wired Network Macintosh For Macintosh Wired Network Interface Users (Mac OS X v10.6.8, 10.7.x, 10.8.x) (MFC-9330CDW / MFC-9340CDW) 16 Before you install IMPORTANT For Mac OS X v10.6.7 or lower users: upgrade to Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the latest drivers and information for the Mac OS X you are using, visit http://solutions.brother.com/.) a Make sure your machine is connected to an AC power source and your Macintosh is ON. You must be logged on with Administrator rights. b Remove the protective cap from the Ethernet port marked with a machine. symbol on your c Connect the network interface cable to the Ethernet port on your machine, and then connect it to a free port on your hub. 17 Install MFL-Pro Suite a Put the CD-ROM into your CD-ROM drive, and then double-click the BROTHER icon on your desktop. b Double-click the Start Here OSX icon. If prompted, select your model. c Choose Wired Network Connection (Ethernet), and then click Next. d The installation screens appear one after another. If prompted, follow any on-screen instructions. IMPORTANT DO NOT cancel any of the screens during the installation. It may take a few minutes for the installation to complete. e Choose your machine from the list, and then click Next. d Make sure your machine is turned on. NOTE If your machine is not found over the network, confirm your network settings (see Before you install on page 19). Windows® Macintosh Wired Network 19