Brother International MFC-9340CDW Quick Setup Guide - English - Page 5
Connect the power cord, and telephone line
View all Brother International MFC-9340CDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
d Load paper in the tray and make sure: The paper is below the maximum paper mark (bbb) a. Overfilling the paper tray will cause paper jams. The side to be printed on is face down. The paper guides touch the sides of the paper so it will feed properly. 4 Connect the power cord and telephone line IMPORTANT DO NOT connect the interface cable yet. a Connect the AC power cord to the machine and then plug it into an AC power outlet. b Press on the control panel. e Put the paper tray firmly back in the machine. Make sure it is completely inserted into the machine. f Lift the support flap a to prevent paper from sliding off the face-down output tray. IMPORTANT DO NOT touch the Touchscreen immediately after plugging in the power cord or turning the machine on. Doing this may cause an error. c Connect the telephone line cord: connect one end of the telephone line cord to the jack on the machine marked LINE and the other end to a modular wall jack. For information about recommended paper, see Basic User's Guide: Recommended paper and print media. IMPORTANT The telephone line cord MUST be connected to the jack on the machine marked LINE. 5