Brother International MFC-J870DW Basic Users Guide - Page 121
the print head. Re-connect the power, shown in the illustration, you cannot move
![]() |
View all Brother International MFC-J870DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
j Place both hands under the plastic tabs on both sides of the machine to lift the scanner cover (1) into the open position. Move the print head (if necessary) to take out any paper remaining in this area. Make sure that jammed paper is not left in the corners of the machine (2) and (3). 1 2 3 Troubleshooting • If the print head is in the right corner as shown in the illustration, you cannot move the print head. Re-connect the power cord. Hold down until the print head moves to the center. Then unplug the machine from the power source and take out the paper. IMPORTANT • DO NOT touch the encoder strip (1). Doing this may cause damage to the machine. • If ink gets on your skin or clothing, immediately wash it off with soap or detergent. 1 • If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper. B 107
![](/manual_guide/products/brother-international-mfcj650dw-basic-users-guide-1e03f4f/121.png)