Brother International MFC-J870DW Basic Users Guide - Page 36
Loading photo paper, photo bypass tray
View all Brother International MFC-J870DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 2 Loading photo paper 2 NOTE In Canada, the photo bypass tray is called the photo paper tray. Use the photo bypass tray, which is located on the top of the output paper tray cover, to print on Photo (4" 6")/(10 15 cm) or Photo L (3.5" 5")/(89 127 mm) size paper. When you use the photo bypass tray, you do not have to remove the paper from the tray beneath it. (For the maximum number of photo cards you can load, see Paper weight, thickness and capacity on page 29.) a Squeeze the blue photo bypass tray release button (1) using your right index finger and thumb and push the photo bypass tray forward until it locks into the photo printing position (2). 1 2 b Press and slide the paper width guides (1) and paper length guide (2) to fit the paper size. 2 1 c Put the photo paper into the photo bypass tray and gently adjust the paper width guides to the paper. Make sure the paper width guides touch the sides of the paper. Check that the paper is flat in the tray. NOTE • Always make sure that the paper is not curled or wrinkled. • The Photo indicator confirms that the photo bypass tray is in the Photo printing position. The A4/LTR indicator confirms that the photo bypass tray is in the Normal printing position. Photo Bypass Tray 22