Brother International PS-2200 Users Manual - English - Page 15
Replacing the Needle, Checking the Needle
View all Brother International PS-2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
KNOWING YOUR SEWING MACHINE CONOZCA SU MÁQUINA DE COSER Replacing the Needle 1. Remove the power supply plug from the outlet. 2. Raise the needle bar to its highest position. 3. Lower the presser foot. 4. Remove the needle by loosening the needle clamp. 5. Insert a different needle as far as possible up against the needle stopper with its flat side facing the back. 6. Tighten the needle clamp. 1 Use a coin or screw driver 1 Cambio de la aguja 1. Retire el enchufe de alimentación de la toma de corriente. 2. Levante la barra de la aguja a su posición más alta. 3. Baje el prensatelas. 4. Retire la aguja, aflojando la abrazadera de la aguja. 5. Introduzca otra aguja, con la parte redonda cara a usted. Hay que meterla lo más adentro posible hasta que toque arriba con el pasador. 6. Vuelva a apretar el tornillo de la aguja. 1 Utilice una moneda o un destornillador 1 Checking the Needle 1. The sewing needle must always be straight and sharp for smooth sewing. 2. To check if the needle is bent, place the flat side of the needle down as shown in the illustration. 3. Replace the needle if it is bent or dull. Verificación de la aguja 1. La aguja de costura siempre debe estar bien recta y afilada para una buena costura. 2. Para averiguar si la aguja no está doblada, coloque la parte plana de la aguja hacia abajo como muestra el dibujo. 3. Cambie la aguja si está doblada o gastada. 9