Brother International PS-2200 Users Manual - English - Page 53
Patchwork
View all Brother International PS-2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Patchwork Pattern (Link Stitch) (Fagoting Stitch) Stitch Length Stitch Width SS 3-6 These stitches are used to join two pieces of fabric while leaving a space between their edges. 1. Fold over the edges of the two pieces of fabric for the hem and baste the edges to a thin piece of paper leaving a small space between them. 2. Set the Pattern Selection Dial to Link Stitch or Fagoting Stitch. 3. Stitch along the edge, pulling both threads slightly when beginning to sew. • Use thicker than normal threads for sewing. 4. After sewing, remove the basting and the paper. Finish by tying knots on the reverse side at the beginning and the end of the seams. 1 First needle drop Patchwork Modelo de puntada (Puntada de unión) (Puntada fagoting) Largo de puntada Ancho de puntada SS 3-6 Estas puntadas sirven para juntar dos piezas de tejido dejando un espacio entre las dos orillas. 1. Doble las orillas de las dos piezas de tejido para el dobladillo e hilvánelas a un papel fino dejando un pequeño espacio entre ambas piezas. 2. Sitúe el selector de puntada en puntada de unión o puntada fagoting. 3. Cosa a lo largo de las orillas, tirando ligeramente de ambos hilos al comienzo. • Use hilos más gruesos de lo normal. 4. Después de coser, quite los hilvanes y el papel. Anude los cabos de los hilos del comienzo y final de la costura por el revés. 1 Primer pespunto de la aguja. 1 1.5 mm BUILT-IN STITCHES PUNTADAS INCORPORADAS 47