Brother International PT18R Users Manual - English and Spanish - Page 26
Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon
UPC - 012502610144
View all Brother International PT18R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
GETTING STARTED 1 Check that the end of the tape is not bent and that it passes through the tape guide. End of tape Tape guide 2 After making sure that the power is off, press on the back cover opening grip and open the back cover. If there is already a tape cassette in the P-touch, remove it by pulling it straight up. 3 Insert the tape cassette into the tape compartment, with the end of the tape facing the P-touch's tape exit slot, and press firmly until you hear a click. When inserting the tape cassette, make sure that the tape and ink ribbon do not catch on the print head. 4 Close the back cover. Tape exit slot • Make sure that the release lever is up when closing the back cover. The back cover cannot be closed if the release lever is pressed down. • Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette. Refer to "Feeding Tape" on page 22. • Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape. • Store tape cassettes in a cool dark location, away from direct sunlight and high temperature, high humidity, or dusty locations. Use the tape cassette as quickly as possible after opening the sealed package. 20 Inserting a Tape Cassette