Brother International PT18R Users Manual - English and Spanish - Page 54

LABEL PRINTING Setting Tape Cutting Description Example Margin L Automatically cuts the tape after each label is ABC ABC printed. The labels have a 0.94" (24 mm) margin on the left and right ends. 0.94" 0.94" (24 mm) (24 mm) Margin S Chain No Cut • When printing labels one at a time: Automatically cuts a piece of blank tape before printing the label, and then cuts the tape after the label is printed. • When printing several labels continuously: Automatically cuts a piece of blank tape before printing the first label, and then cuts the tape after each label is printed. • The labels have a 0.16" (4 mm) margin on the left and right ends. 0.89" (22.5 mm) ABC ABC 0.16" 0.16" (4 mm) (4 mm) • When printing labels one at a time: Automatically cuts a piece of blank tape before printing the label, and then does not cut the tape after the label is printed. • When printing several labels continuously: Automatically cuts a piece of blank tape before printing the first label, and then cuts the tape after each label is printed. • The labels have a 0.16" (4 mm) margin on the left and right ends. • The tape is not fed and cut after the last label is printed. 0.89" (22.5 mm) ABC ABC 0.16" 0.16" (4 mm) (4 mm) • Use this setting to print a strip of labels with no cuts in between. • Using the "Cut" key will feed and cut the last label printed. ABC ABC 1.04" 0.31" (26.5 mm) (8 mm) • When using Fabric Iron-On Tapes, Extra Strength Adhesive Tapes or any other special tapes, set "No Cut" to prevent the cutter from cutting the tape. Leave adequate space between labels when creating and printing them, and then use scissors to cut the tape in the space between the labels. • The tape is not cut after the last label is printed when "Chain" or "No Cut" is set. Press the key to feed and cut tape automatically, or cut the tape manually if you are using tape that cannot be cut by the cutter. 48 Tape Cutting Options