Brother International PT18R Users Manual - English and Spanish - Page 28
Feeding Tape, LCD Display, LCD Contrast
UPC - 012502610144
View all Brother International PT18R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
GETTING STARTED Feeding Tape The Feed & Cut function feeds 0.89" (22.5 mm) of blank tape then cuts the tape. • Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette. • Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to be discharged with the tape. • Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam. 1 Press the key. "Feed & Cut?" appears on the display. 2 Press the key to feed tape. The message "Feeding Tape... Please Wait" appears while the tape is fed, and then the tape is cut. Press while "Feed & Cut?" is displayed to cancel tape feeding. LCD Display LCD Contrast You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1, -2) to make the screen easier to read. The default setting is "0". 1 Press the key to display the Tools menu, select "LCD Contrast" using the or key, and then press the key. 2 Select a contrast level using the or key. The screen contrast changes each time you press the or key, allowing you to set the most suitable contrast. 3 Press the key. • Press the key to return to the previous step. • Pressing the key on the contrast setting screen sets the contrast to the default value "0". 22 Feeding Tape