Brother International Quattro 2 6700D Users Manual - English - Page 141

SEWING THE STITCHES c Check that the needle drops at the desired position and lower the presser foot, making sure the upper thread passes underneath the buttonhole foot. e Gently hold the end of the upper thread, and then press the "Start/Stop" button to start the machine. Note • Pass the thread underneath the presser foot. • Set the presser foot so that there is no gap behind the section marked with an "A" (the shaded area in the illustration below). If there is a gap, the size of the darning will not be correct. → Once sewing is completed, the machine automatically sews reinforcement stitches, and then stops. 3 Memo • If automatic thread cutting is turned on before you start sewing, both threads are automatically cut after the reinforcement stitches are sewn. If the fabric does not feed (for example, because it is too thick), increase the stitch length setting. Utility Stitches d Lower the buttonhole lever so that it is positioned behind the metal bracket on the buttonhole foot. a Buttonhole lever a Metal bracket 139