Brother International Quattro 2 6700D Users Manual - English - Page 321

CREATING BOBBIN WORK (EMBROIDERY) CAUTION • When sewing bobbin work, be sure to select an embroidery pattern for bobbin work. If any other type of pattern is selected, the machine may be damaged. Note • Embroidery sewing speed defaults to 350 spm when a bobbin work embroidery pattern is selected. The Settings screen will not allow speed to be adjusted. Note • Since bobbin work is sewn from the wrong side of the fabric, the pattern shown in the screen appears as a mirror image of the final sewn embroidery. If necessary, flip the image to preview it. In addition, when sewing with the thread colors shown in the sewing screen, select a bobbin thread that matches what is shown in the screen. Memo • When an embroidery pattern for bobbin work is selected, the automatic thread cutting function is turned off. Afterward, if a pattern other than one for bobbin work is selected, the automatic thread cutting function is returned to the setting that was selected before the embroidery pattern for bobbin work was chosen. i Press . → The sewing screen is displayed. a Image shown in screen b Sewn embroidery (Right side of fabric) Memo • With embroidery patterns for bobbin work, the size and thread density cannot be changed. In addition, the automatic thread cutting function cannot be turned on. j Press the upper , and then thread. adjust the tension of For details on adjusting the tension of the upper thread, refer to "Adjusting Thread Tension" on page 233. 7 Memo • We recommend a setting between 6 and 8 for the upper thread tension. How to Create Bobbin Work 319