Brother International Quattro 2 6700D Users Manual - English - Page 76
Sewing Reinforcement Stitches, Sewing Curves
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
SEWING a Pull the retractable cord out from the foot controller to the desired length, and then insert the foot controller plug into its jack on the machine. Sewing Reinforcement Stitches Reverse/reinforcement stitches are generally necessary at the beginning and end of sewing. You can use the "Reverse/Reinforcement Stitch" button to sew reverse/reinforcement stitches manually (see page 15). a Foot controller b Foot controller jack Note • Do not pull the retractable cord out beyond the red mark on the cord. b Slowly depress sewing. the foot controller to start If the automatic reinforcement stitch is selected on the screen, reverse stitches (or reinforcement stitches) will be sewn automatically at the beginning of sewing when the "Start/Stop" button is pressed. Press the "Reverse/Reinforcement Stitch" button to sew reverse stitches (or reinforcement stitches) automatically at the end of sewing (see page 81). Memo • The speed that is set using the sewing speed controller is the foot controller's maximum sewing speed. c Release the machine. foot controller to stop the a Reverse stitch b Reinforcement stitch If the stitch which you select has a double mark " " at the top of the key display, you can sew reverse stitches by holding the "Reverse/ Reinforcement Stitch" button. If the stitch which you select has a dot mark " " at the top of the key display, you can sew reinforcement stitches by holding the "Reverse/ Reinforcement Stitch" button. Sewing Curves Sew slowly while keeping the seam parallel with the fabric edge as you guide the fabric around the curve. 74