Brother International Quattro 2 6700D Users Manual - English - Page 350
Error Messages
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
ERROR MESSAGES ERROR MESSAGES If the machine is not properly set and the "Start/Stop" button or the "Reverse/Reinforcement Stitch" button is pressed, or if the operation procedure is incorrect, the machine does not start. An alarm sounds and an error message is displayed on the LCD. If an error message displays, follow the instructions in the message. Below is an explanation of error messages. Refer to these when necessary (if you press or do the operation correctly while the error message is displayed, the message disappears). CAUTION • Be sure to rethread the machine. If you press the "Start/Stop" button without rethreading the machine, the thread tension may be wrong or the needle may break and cause injury. This message is displayed when the motor locks due to tangled thread or for other reasons related to thread delivery. This message is displayed when the needle plate cover is not attached. This message is displayed when the embroidery unit is initializing. This message is displayed when you try to combine more than 71 patterns. 348 This message is displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed. This message is displayed when the needle plate is removed with the machine on or when the machine is turned on and embroidery or embroidery edit mode is selected (see page 54). This message is displayed when the machine needs to be maintained. (see page 341) This message is displayed when the buttonhole lever is up, a buttonhole stitch is selected, and the "Start/ Stop" button or "Reverse/ Reinforcement Stitch" button is pushed. This message is displayed when the speed control lever is set to control the zigzag stitch width, and the "Start/ Stop" button is pushed. Use the foot controller to operate the machine.