Brother International T-8752C Instruction Manual - English - Page 34
Adjusting the stitch length, 4-7. Using the knee lifter
View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4. PREPARATION BEFORE SEWING 4-6. Adjusting the stitch length Locked Unlocked 1. Unlock the stitch length dial (2) by turning the dial lock lever (1) to the right until a click is heard. 2. Turn the stitch length dial (2) clockwise or counterclockwise so that the desired stitch length is at the uppermost position on the dial. The larger the number, the longer the stitch length will be. (The numbers on the dial are for use as a guide. The length of the finished stitches may vary depending on the type and thickness of material being sewn. Adjust while looking at the finished stitches.) When turning the stitch length dial (2) from a larger setting to a smaller setting, it will be easier to turn the dial if the reverse lever (3) is pushed to the halfwaydown position. 3. Turn the dial lock lever (1) firmly to the left to lock the stitch length dial (2). * Check that the stitch length dial (2) does not rotate. 4-7. Using the knee lifter 2906M The presser foot (2) can be raised by pressing the knee lifter plate (1). 2907M 2469B 4-8. Using the thread wiper (models with thread trimmer only) 2184B 1. Press the thread wiper switch (1) to the side. 2. Press the thread wiper key (2) on the operation panel so that the indicator illuminates. After thread trimming is carried out, the thread wiper (3) will pull up the thread. 2470B 25 T-8421C, 8422C, 8452C, 8722C, 8752C