Brother International T-8752C Instruction Manual - English - Page 8

CONTENTS 1. MACHINE SPECIFICATIONS 1 2. NAMES OF MAJOR PARTS 3 3. INSTALLATION 4 3-1. Table processing diagram 5 3-2. Installation 5 3-3. Lubrication 9 3-4. Connecting the cords 11 3-4-1. Opening the control box cover 11 3-4-2. Connecting the cords 11 3-5. Test operation (Operating the treadle 16 3-6. Adjusting the treadle operation 17 4. PREPARATION BEFORE SEWING.....18 4-1. Installing the needle 18 4-2. Removing the bobbin 19 4-3. Winding the lower thread 20 4-4. Installing the bobbin 21 4-5. Threading the upper thread 23 4-6. Adjusting the stitch length 25 4-7. Using the knee lifter 25 4-8. Using the thread wiper (models with thread trimmer only 25 4-9. Corner sewing method (T-8452C, 8752C) ..... 26 4-9-1. To stop the needle bars (right and left 26 4-9-2. Number of stitches: quick-reference guide 26 5. USING THE G50 OPERATION PANEL (BASIC OPERATIONS 27 5-1. Names and functions 27 5-2. Sewing start and end backtack stitches ......... 29 5-3. Sewing continuous backtack stitches 30 5-4. Sewing fixed stitches 31 5-5. Sewing pleat presser stitches 32 5-6. Using the lower thread counter 33 6. USING THE G50 OPERATION PANEL (ADVANCED OPERATIONS 34 6-1. Names and functions 34 6-2. Adjusting the needle up stop position 35 6-3. LOCK key 36 6-4. Resetting all settings to their defaults 37 7. USING THE G10 OPERATION PANEL (BASIC OPERATIONS 38 7-1. Names and functions 38 7-2. Sewing start and end backtack stitches..........39 7-3. Sewing continuous backtack stitches 40 8. USING THE G10 OPERATION PANEL (ADVANCED OPERATIONS 41 8-1. Changing the needle stop position 41 8-2. Slow start 42 8-3. Correction sewing 43 8-4. Thread trimming lock (models with thread trimmer only 44 8-5. Setting the maximum sewing speed 45 8-6. Adjusting the needle up stop position 46 8-7. Lock function 47 8-8. Resetting all settings to their defaults 47 9. SEWING 48 9-1. Sewing 48 9-2. Backtacking 49 9-3. Sewing condensed stitches 50 10. THREAD TENSION 51 10-1. Adjusting the thread tension 51 10-2. Adjusting the presser foot pressure 52 10-3. Adjusting the presser foot floating amount (minute lifting amount 53 10-4. Adjusting the trailing length after thread trimming (models with thread trimmer only 53 10-5. Adjusting the thread take-up amount............54 T-8421C, 8422C, 8452C, 8722C, 8752C