Brother International T-8752C Instruction Manual - English - Page 56

Lock function, 8-8. Resetting all settings to their defaults

Get Brother International T-8752C PDF manuals and user guides View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

8. USING THE G10 OPERATION PANEL (ADVANCED OPERATIONS) 8-7. Lock function DANGER Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet before opening the cover of the control box. Touching areas where high voltages are present can result in severe injury. Control box When the lock function is set to "ON", the key operations for making settings such as the following will be disabled in order to prevent these settings from being accidentally changed. (Examples of disabled key operations) ・ MAX key ・ Initialization etc. < To turn on the lock function > Set DIP switch 1 to ON. < To turn off the lock function > Set DIP switch 1 to OFF. (The lock will be canceled and the functions can then be set.) 4221M 8-8. Resetting all settings to their defaults If the sewing machine stops operating normally, the cause may be that an incorrect setting may have been made for the memory data by means of memory switches, for instance. In such cases, it may be possible to restore normal operation by following the steps given below to initialize the memory setting data. * This setting cannot be carried out if the lock function is on. (For details on turning the lock function off, refer to "8-7. Lock function".) 1 Activating initialization mode 4222M (While pressing the continuous backtack key, press the power ON switch.) 2 (Press for 2 seconds or more) "in.AL" will appear in the display (1). Once initialization is complete, the "in.AL" appearing in the display (1) will disappear and normal sewing machine operation will then be possible. 4206M 47 T-8421C, 8422C, 8452C, 8722C, 8752C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
T-8421C, 8422C, 8452C, 8722C, 8752C
8. USING THE G10 OPERATION PANEL (ADVANCED OPERATIONS)
47
8-7. Lock function
DANGER
Wait at least 5 minutes after turning off the power switch and disconnecting the power cord from the wall outlet
before opening the cover of the control box. Touching areas where high voltages are present can result in severe
injury.
When the lock function is set to “ON”, the key operations for
making settings such as the following will be disabled in
order to prevent these settings from being accidentally
changed.
(Examples of disabled key operations)
・
MAX key
・
Initialization ………………… etc.
< To turn on the lock function >
Set DIP switch 1 to ON.
< To turn off the lock function >
Set DIP switch 1 to OFF. (The lock will be canceled and
the functions can then be set.)
8-8. Resetting all settings to their defaults
If the sewing machine stops operating normally, the cause may be that an incorrect setting may have been made for the
memory data by means of memory switches, for instance. In such cases, it may be possible to restore normal operation by
following the steps given below to initialize the memory setting data.
*
This setting cannot be carried out if the lock function is on. (For details on turning the lock function off, refer to “8-7.
Lock function”.)
Activating initialization mode
1
(While pressing the continuous backtack key,
press the power ON switch.)
“in.AL” will appear in the display (1).
2
(Press for 2 seconds or more)
Once initialization is complete, the “in.AL” appearing in the
display (1) will disappear and normal sewing machine
operation will then be possible.
Control box
4221M
4222M
4206M