Brother International T-8752C Instruction Manual - English - Page 39
Sewing continuous backtack stitches, USING THE G50 OPERATION PANEL BASIC OPERATIONS
View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
5. USING THE G50 OPERATION PANEL (BASIC OPERATIONS) 5-3. Sewing continuous backtack stitches 2185B 1 Setting continuous backtack stitches Example: 4177M 2 If the treadle is simply depressed continuously, the number of stitches set for A, B, C and D will be sewn in a single cycle, the thread will be trimmed automatically (models with thread trimmer) and then the needle bar will stop in the needle up position. NOTE: • If the treadle is returned to the neutral position while continuous backtacking is being carried out, the sewing machine will stop at the point where the treadle returns to the neutral position.If the treadle is depressed again, operation will resume from the point where it was interrupted. • If the indicator of the thread trimming lock key is illuminated, the sewing machine will stop in the needle up position without thread trimming being carried out. 2159M When the AUTO key is pressed to turn on the automatic sewing function, operation will be carried out automatically from continuous backtack sewing through to thread trimming (models with thread trimmer) just by depressing the treadle once, without needing to keep it depressed continuously. T-8421C, 8422C, 8452C, 8722C, 8752C 30