Brother International T-8752C Instruction Manual - English - Page 59

Sewing condensed stitches, SEWING, <Setting&gt

Get Brother International T-8752C PDF manuals and user guides View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

9-3. Sewing condensed stitches 9. SEWING y If you press the actuator switch (1) or the reverse lever (2) while sewing is in progress, you can sew stitches (forward direction) with small stitch lengths. y Before carrying out sewing, set the stitch length for condensed stitches as follows. Sewing direction Locked Unlocked Condensed stitches 2195B 2920M 1. Unlock the stitch length dial (4) by turning the dial lock lever (3) to the right. 2. Turn the stitch length dial (4) to the stitch length to be used for condensed stitches. 3. Loosen the screw (5) and lift up the stopper (6) until it touches the reverse stitching lever plate (7). 4. Tighten the screw (5) to secure the stopper (6). 1. Return the stitch length dial (4) to the stitch length for normal sewing. 2. Turn the dial lock lever (3) firmly to the left to lock the stitch length dial (4). 3. Start sewing. 4. At the position where you would like to start sewing condensed stitches, press the actuator switch (1) or the reverse lever (2). (Condensed stitches are sewn while the actuator switch (1) or reverse lever (2) is being pressed.) * To stop sewing condense stitches and return to using the backtack function, lower the stopper (6) so that it does not touch the reverse stitching lever plate (7). 2921M T-8421C, 8422C, 8452C, 8722C, 8752C 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
T-8421C, 8422C, 8452C, 8722C, 8752C
9. SEWING
50
9-3. Sewing condensed stitches
y
If you press the actuator switch (1) or the reverse lever (2)
while sewing is in progress, you can sew stitches (forward
direction) with small stitch lengths.
y
Before carrying out sewing, set the stitch length for
condensed stitches as follows.
<Setting>
1. Unlock the stitch length dial (4) by turning the dial lock
lever (3) to the right.
2. Turn the stitch length dial (4) to the stitch length to be
used for condensed stitches.
3. Loosen the screw (5) and lift up the stopper (6) until it
touches the reverse stitching lever plate (7).
4. Tighten the screw (5) to secure the stopper (6).
<Sewing>
1. Return the stitch length dial (4) to the stitch length for
normal sewing.
2. Turn the dial lock lever (3) firmly to the left to lock the
stitch length dial (4).
3. Start sewing.
4. At the position where you would like to start sewing
condensed stitches, press the actuator switch (1) or the
reverse lever (2).
(Condensed stitches are sewn while the actuator switch
(1) or reverse lever (2) is being pressed.)
*
To stop sewing condense stitches and return to using the
backtack function, lower the stopper (6) so that it does not
touch the reverse stitching lever plate (7).
2920M
2921M
Locked
Unlocked
2195B
Condensed stitches
Sewing direction