Home » Brother International Manuals » Sewing Machines » Brother International T-8752C » Manual Viewer

Brother International T-8752C Instruction Manual - English - Page 49

Sewing continuous backtack stitches, where it was interrupted.

Get Brother International T-8752C PDF manuals and user guides

View all Brother International T-8752C manuals

Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

7. USING THE G10 OPERATION PANEL (BASIC OPERATIONS) 7-3. Sewing continuous backtack stitches 2185B 1 Setting continuous backtack stitches Example: 4202M 2 If the treadle is simply depressed continuously, the number of stitches set for A, B, C and D will be sewn in a single cycle, the thread will be trimmed automatically (models with thread trimmer) and then the needle bar will stop in the needle up position. NOTE: ・ If the treadle is returned to the neutral position while continuous backtacking is being carried out, the sewing machine will stop at the point where the treadle returns to the neutral position.If the treadle is depressed again, operation will resume from the point where it was interrupted. ・ If thread trimming lock is set, the sewing machine will stop in the needle up position without thread trimming being carried out. 2159M T-8421C, 8422C, 8452C, 8722C, 8752C 40

Section	Page
COVER	1
SAFETY INSTRUCTIONS	3
1. Safety indications and their meanings	3
2. Notes on safety	4
3. Warning labels	6
CONTENTS	8
1. MACHINE SPECIFICATIONS	10
2. NAMES OF MAJOR PARTS	12
3. INSTALLATION	13
3-1. Table processing diagram	14
3-2. Installation	14
3-3. Lubrication	18
3-4. Connecting the cords	20
3-4-1. Opening the control box cover	20
3-4-2. Connecting the cords	20
3-5. Test operation (Operating the treadle)	25
3-6. Adjusting the treadle operation	26
4. PREPARATION BEFORE SEWING	27
4-1. Installing the needle	27
4-2. Removing the bobbin	28
4-3. Winding the lower thread	29
4-4. Installing the bobbin	30
4-5. Threading the upper thread	32
4-6. Adjusting the stitch length	34
4-7. Using the knee lifter	34
4-8. Using the thread wiper (models with thread trimmer only)	34
4-9. Corner sewing method (T-8452C, 8752C)	35
4-9-1. To stop the needle bars (right and left)	35
4-9-2. Number of stitches: quick-reference guide	35
5. USING THE G50 OPERATION PANEL(BASIC OPERATIONS)	36
5-1. Names and functions	36
5-2. Sewing start and end backtack stitches	38
5-3. Sewing continuous backtack stitches	39
5-4. Sewing fixed stitches	40
5-5. Sewing pleat presser stitches	41
5-6. Using the lower thread counter	42
6. USING THE G50 OPERATION PANEL(ADVANCED OPERATIONS)	43
6-1. Names and functions	43
6-2. Adjusting the needle up stop position	44
6-3. LOCK key	45
6-4. Resetting all settings to their defaults	46
7. USING THE G10 OPERATION PANEL(BASIC OPERATIONS)	47
7-1. Names and functions	47
7-2. Sewing start and end backtack stitches	48
7-3. Sewing continuous backtack stitches	49
8. USING THE G10 OPERATION PANEL(ADVANCED OPERATIONS)	50
8-1. Changing the needle stop position	50
8-2. Slow start	51
8-3. Correction sewing	52
8-4. Thread trimming lock (models with thread trimmer only)	53
8-5. Setting the maximum sewing speed	54
8-6. Adjusting the needle up stop position	55
8-7. Lock function	56
8-8. Resetting all settings to their defaults	56
9. SEWING	57
9-1. Sewing	57
9-2. Backtacking	58
9-3. Sewing condensed stitches	59
10. THREAD TENSION	60
10-1. Adjusting the thread tension	60
10-2. Adjusting the presser foot pressure	61
10-3. Adjusting the presser foot floating amount (minute lifting amount)	62
10-4. Adjusting the trailing length after thread trimming (models with thread trimmer only)	62
10-5. Adjusting the thread take-up amount	63
11. CLEANING	64
11-1. Daily cleaning procedures	64
11-2. Lubricating via the oil cover (every 6 months)	65
11-3. Applying grease (Semi dry specifications)[When “GrUP” appears ... When using the G50 operation panel]	66
11-4. Applying grease (Semi dry specifications)[When “GrUP” appears ... When using the G10 operation panel]	69
12. ADJUSTING THE ROTARY HOOK LUBRICATION AMOUNT	72
13. STANDARD ADJUSTMENT	73
13-1. Safety switch position	73
13-2. Thread take-up amount for thread take-up spring	74
13-3. Thread take-up spring tension	75
13-4. Clearance between rotary hook and needle plate	76
13-5. Clearance between rotary hook and opener	77
13-6. Presser foot height	77
13-7. Needle and rotary hook timing	78
13-8. Installing the feed dog	80
13-9. Feed dog position	81
13-10. Feed dog height	82
13-11. Feed dog angle	83
14. TROUBLESHOOTING	84
14-1. Sewing	84
14-2. Error code displays	89
15. 7-SEGMENT DISPLAY	93

Match case Limit results 1 per page

T-8421C, 8422C, 8452C, 8722C, 8752C

7. USING THE G10 OPERATION PANEL (BASIC OPERATIONS)

7-3. Sewing continuous backtack stitches

Setting continuous backtack stitches

If the treadle is simply depressed continuously, the number of stitches set for A, B, C and D

will be sewn in a single cycle, the thread will be trimmed automatically (models with thread

trimmer) and then the needle bar will stop in the needle up position.

NOTE:

・

If the treadle is returned to the neutral position while continuous backtacking is being

carried out, the sewing machine will stop at the point where the treadle returns to the

neutral position.If the treadle is depressed again, operation will resume from the point

where it was interrupted.

・

If thread trimming lock is set, the sewing machine will stop in the needle up position

without thread trimming being carried out.

2159M

4202M

2185B

Example: