Brother International T-8752C Instruction Manual - English - Page 68

Resetting the grease consumption amount &gt, CLEANING

Get Brother International T-8752C PDF manuals and user guides View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

11. CLEANING 2201B Turn the machine pulley until the screw (1) can be seen. Use the tip of a screwdriver or similar to apply 5-10 mm beads of grease to the slide block slider (2). * Pour oil into the oil cover at the same time. (Refer to p.9.) < Resetting the grease consumption amount > 4 places at top, bottom, left and right of the slide block (3) 2202B 2259B After the grease has been applied, carry out the following procedure to reset the grease consumption amount. 1. While pressing the key (1) and the key (2) at the right end simultaneously, press the power ON switch. 2. "GuCt xxx" will appear in the display (3). ("xxx" represents the amount of grease consumed. For example, "100" means that 100% of the grease has been consumed.) 3. Press the RESET key (4). 4. The display (3) will change to "GuCt 0". 5. Press the FUNC key (5). The display (3) will change to stitch number display mode and treadle operation will be possible. (This completes the reset procedure.) 59 T-8421C, 8422C, 8452C, 8722C, 8752C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
T-8421C, 8422C, 8452C, 8722C, 8752C
11. CLEANING
59
<
Resetting the grease consumption amount >
After the grease has been applied, carry out the following procedure to reset the grease consumption amount.
1. While pressing the
key (1) and the
key (2) at the right end simultaneously, press the power ON switch.
2. “GuCt
xxx” will appear in the display (3). (“xxx” represents the amount of grease consumed. For example, “100” means
that 100% of the grease has been consumed.)
3. Press the RESET key (4).
4. The display (3) will change to “GuCt
0”.
5. Press the FUNC key (5). The display (3) will change to stitch number display mode and treadle operation will be possible.
(This completes the reset procedure.)
* Pour oil into the oil cover at the same time. (Refer to p.9.)
2201B
2202B
Turn the machine pulley until the
screw (1) can be seen.
Use the tip of a screwdriver or similar to
apply 5-10 mm beads of grease to the slide
block slider (2).
4 places at top,
bottom, left and right
of the slide block (3)
2259B