Brother International T-8752C Instruction Manual - English - Page 40
Sewing fixed stitches, <Automatic sewing>
View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5. USING THE G50 OPERATION PANEL (BASIC OPERATIONS) 5-4. Sewing fixed stitches 2912M 1 Setting the number of fixed stitches 4178M Example: From 0 to 1999 stitches can be set. 2 After the set number of stitches in E (fixed stitches) have been sewn, the sewing machine stops in the needle position that has been set by the needle up/down key (refer to p. 34). After this, normal sewing is carried out if the treadle is depressed. 2159M 3 After the thread is trimmed (models with thread trimmer), fixed stitch sewing mode is enabled. 2160M Press the thread trimming key to turn on the thread trimming function. When the treadle is continuously depressed, thread trimming is carried out after the fixed stitches have been sewn. When the AUTO key is pressed to turn on the automatic sewing function, the fixed stitches are sewn simply by depressing the treadle once without needing to depress it continuously. • The start backtack key and end backtack key can be pressed to turn on the backtack sewing function. • If changing the number of end backtack stitches in C and D, press the fixed stitch key to temporarily turn off the fixed stitch function before making the change. (The CD display will show the number of stitches and the setting can then be changed.) 31 T-8421C, 8422C, 8452C, 8722C, 8752C