Brother International T-8752C Instruction Manual - English - Page 61
Adjusting the presser foot pressure, THREAD TENSION, Reference values
View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
10-2. Adjusting the presser foot pressure Correct stitches 0894M Upper thread 0895M Skipped stitches occur 0896M Uneven stitch length 10. THREAD TENSION Increase the pressure. Becomes weaker 0897M Stitches are puckered Decrease the pressure. Becomes stronger The presser foot pressure should be as weak as possible, but strong enough so that the material does not slip. (Refer to "Adjusting screw height" in the table below as a guide to adjustment.) 1. Loosen the adjusting nut (1). 2. Turn the presser adjusting screw (2) to adjust the presser foot pressure. 3. Tighten the adjusting nut (1). Reference values Use For foundation For light-weight and medium- weight materials For heavy-weight materials Adjusting screw height Approx. 34mm Approx. 34mm Approx. 29mm 2925M T-8421C, 8422C, 8452C, 8722C, 8752C 52