Brother International T-8752C Instruction Manual - English - Page 67

<Applying grease&gt, CLEANING, Using the tube, Applying grease

Get Brother International T-8752C PDF manuals and user guides View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Use Brother-specified "Grease unit (SA8837-001)". 1. Using the tube 11. CLEANING 2. Applying grease Follow the procedure below to apply grease to the places indicated by arrows on the next page. Grease 4087M Insert the tip of the nozzle (1) all the way into the hole in the part. Apply grease without letting it spill out. Tighten the screw (2) to push in the grease. 2936M 1. Turn the power switch to "OFF". 2. Remove the screw (2). (Refer to the next page for greasing locations.) 3. Apply grease to each of the holes until the grease overflows slightly. 4. Tighten the screw (2) to push in the grease. 5. Use a cloth to wipe away any excess grease from around the screw (2). 6. Apply grease to all locations shown on the next page in the same way. 7. Carry out the reset procedure given on the next page. NOTE: ・ Once the grease tube has been opened, remove the nozzle from the tube, attach the cap securely and store the tube in a cool dark place. ・ The grease should be used as quickly as possible. ・ When using the grease again, remove any old grease from inside the nozzle first. (Store the tube away carefully once the tube has been opened, otherwise the grease remaining inside the tube may deteriorate, and this may affect its lubricating performance.) 2937M T-8421C, 8422C, 8452C, 8722C, 8752C 58

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
T-8421C, 8422C, 8452C, 8722C, 8752C
11. CLEANING
58
<Applying grease>
Use Brother-specified “Grease unit (SA8837-001)”.
1. Using the tube
2. Applying grease
Follow the procedure below to apply grease to the places indicated by arrows on the next page.
1. Turn the power switch to “OFF”.
2. Remove the screw (2). (Refer to the next page for greasing locations.)
3. Apply grease to each of the holes until the grease overflows slightly.
4. Tighten the screw (2) to push in the grease.
5. Use a cloth to wipe away any excess grease from around the screw
(2).
6. Apply grease to all locations shown on the next page in the same way.
7. Carry out the reset procedure given on the next page.
NOTE:
・
Once the grease tube has been opened, remove the nozzle from the
tube, attach the cap securely and store the tube in a cool dark place.
・
The grease should be used as quickly as possible.
・
When using the grease again, remove any old grease from inside the
nozzle first.
(Store the tube away carefully once the tube has been opened, otherwise the
grease remaining inside the tube may deteriorate, and this may affect its
lubricating performance.)
Insert the tip of the nozzle
(1) all the way into the hole
in the part.
Apply
grease
without
letting it spill out.
Tighten the screw (2) to push
in the grease.
2936M
2937M
Grease
4087M