Brother International T-8752C Instruction Manual - English - Page 70
CLEANING, Using the tube, Applying grease, Use Brother-specified Grease unit SA8837-001.
View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
11. CLEANING Use Brother-specified "Grease unit (SA8837-001)". 1. Using the tube 2. Applying grease Follow the procedure below to apply grease to the places indicated by arrows on the next page. Grease 4087M Insert the tip of the nozzle (1) all the way into the hole in the part. Apply grease without letting it spill out. Tighten the screw (2) to push in the grease. 2936M 1. Turn the power switch to "OFF". 2. Remove the screw (2). (Refer to the next page for greasing locations.) 3. Apply grease to each of the holes until the grease overflows slightly. 4. Tighten the screw (2) to push in the grease. 5. Use a cloth to wipe away any excess grease from around the screw (2). 6. Apply grease to all locations shown on the next page in the same way. 7. Carry out the reset procedure given on the next page. NOTE: ・ Once the grease tube has been opened, remove the nozzle from the tube, attach the cap securely and store the tube in a cool dark place. ・ The grease should be used as quickly as possible. ・ When using the grease again, remove any old grease from inside the nozzle first. (Store the tube away carefully once the tube has been opened, otherwise the grease remaining inside the tube may deteriorate, and this may affect its lubricating performance.) 2937M 61 T-8421C, 8422C, 8452C, 8722C, 8752C