Brother International T-8752C Instruction Manual - English - Page 71

CLEANING, Pour oil into the oil cover at the same time. Refer to p.9.

Get Brother International T-8752C PDF manuals and user guides View all Brother International T-8752C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

11. CLEANING 2201B Turn the machine pulley until the screw (1) can be seen. Use the tip of a screwdriver or similar to apply 5-10 mm beads of grease to the slide block slider (2). 4 places at top, bottom, left and right of the slide block (3) * Pour oil into the oil cover at the same time. (Refer to p.9.) 2202B < Resetting the grease consumption amount > After the grease has been applied, carry out the following procedure to reset the grease consumption amount. 1. While pressing the key (1) and the key (2) at the right end simultaneously, press the power ON switch. 2. "GuCt" will appear in the display (3). 3. Press the end backtack key (4). 4. The indicator of the end backtack key (4) will illuminate and the display (3) will change to showing "xxx". ("xxx" represents the amount of grease consumed. For example, "100" means that 100% of the grease has been consumed.) 5. Press the continuous backtack key (5) for 2 seconds or more. 6. The display (1) will change to " 0". 7. Press the thread wiper key (6). The display (3) will change to stitch number display mode and treadle operation will be possible. (This completes the reset procedure.) 2261B 2138M 2139M T-8421C, 8422C, 8452C, 8722C, 8752C 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
T-8421C, 8422C, 8452C, 8722C, 8752C
11. CLEANING
62
<
Resetting the grease consumption amount >
After the grease has been applied, carry out the following
procedure to reset the grease consumption amount.
1. While pressing the
key (1) and the
key (2) at the
right end simultaneously, press the power ON switch.
2. “GuCt” will appear in the display (3).
3. Press the end backtack key (4).
4. The indicator of the end backtack key (4) will illuminate
and the display (3) will change to showing “xxx”. (“xxx”
represents the amount of grease consumed. For example,
“100” means that 100% of the grease has been
consumed.)
5. Press the continuous backtack key (5) for 2 seconds or
more.
6. The display (1) will change to “
0”.
7. Press the thread wiper key (6). The display (3) will change
to stitch number display mode and treadle operation will
be possible. (This completes the reset procedure.)
* Pour oil into the oil cover at the same time. (Refer to p.9.)
2201B
2202B
Turn the machine pulley until the
screw (1) can be seen.
Use the tip of a screwdriver or similar to
apply 5-10 mm beads of grease to the slide
block slider (2).
4 places at top,
bottom, left and right
of the slide block (3)
2261B
2138M
2139M