Canon 1629B001 XH G1 XH A1 Instruction Manual - Page 122

Erasing Images

Page 122 highlights

Erasing Images You can erase images one at a time or all at once.  Be careful when erasing images. Erased images cannot be recovered.  Erasing a still image that had a custom preset file embedded (recorded with the [ON+CP DATA] setting) will erase the image and the embedded custom preset file. Protected images ( 123) cannot be erased. Erasing a Single Image 1. Select the image you wish to erase. 2. Press the SELECT/SET dial to open the still image operations menu. In mode, the menu appears when you press the SELECT/SET dial while you are reviewing a still image, or if you press the SELECT/SET dial immediately after recording an image. 3. Select [IMAGE ERASE]. 4. Select [ERASE]. The image is erased and the previous image appears. 5. Select [ CLOSE] to close the menu. Erasing All Images MENU ( 25) CARD OPERATIONS ERASE ALL IMAGES 1. Open the menu and select [CARD OPERATIONS]. 2. Select [ERASE ALL IMAGES]. 3. Select [YES] and close the menu. All still images except the protected ones are erased. 122

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

122
Erasing Images
You can erase images one at a time or all at once.
Be careful when erasing images. Erased images cannot be recovered.
Erasing a still image that had a custom preset file embedded (recorded with the [ON+CP DATA]
setting) will erase the image and the embedded custom preset file.
Protected images (
123) cannot be erased.
Erasing a Single Image
1.
Select the image you wish to erase.
2.
Press the SELECT/SET dial to open the still image operations menu.
In
mode, the menu appears when you press the SELECT/SET dial while you are
reviewing a still image, or if you press the SELECT/SET dial immediately after recording an image.
3.
Select [IMAGE ERASE].
4. Select [ERASE].
The image is erased and the previous image appears.
5.
Select [
CLOSE] to close the menu.
Erasing All Images
1.
Open the menu and select [CARD OPERATIONS].
2.
Select [ERASE ALL IMAGES].
3.
Select [YES] and close the menu.
All still images except the protected ones are erased.
MENU
(
25)
CARD OPERATIONS
ERASE ALL IMAGES