Canon 1629B001 XH G1 XH A1 Instruction Manual - Page 152
Troubleshooting
UPC - 013803071771
View all Canon 1629B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Camcorder will not turn on. The camcorder switches off by itself. The screen switches on and off. Cause Solution Battery pack is not correctly attached. Attach the battery pack correctly. 15 Power save function has been Turn on the camcorder. 28 activated. Battery pack is exhausted. Replace or charge the battery pack. 15 Recording/Playback Problem Cause Solution Buttons will not work. Cassette is not loaded. Load a cassette. 23 " " flashes on the screen. Condensation is detected. See reference page. 148 "REMOVE THE CASSETTE" appears on the screen. Camcorder stopped operating to protect the tape. Remove the cassette and reinsert it. 23 The wireless controller will not Camcorder and wireless controller Change the remote sensor modes. 105 work. are not set to the same remote sensor mode. Batteries of the wireless controller Replace the batteries. 22 are exhausted. Abnormal characters appear on the This camcorder uses a screen. The camcorder does not microcomputer. External noise or Disconnect the power source and - reconnect it after a short time. If the operate properly. static electricity may cause abnormal problem still persists, disconnect the characters to appear on the screen. power source and press the RESET button with a pointed item. Pressing the RESET button resets all settings. Recording Problem Cause Solution The dial is not in the OFF The LED indicators option in the position but the POWER indicator customized functions is set to is off. [02 OFF]. Set the [LED] setting to one of the 89 other types. The STANDBY lever is at the LOCK Turn the STANDBY lever to the 28 position. STANDBY position. Image will not appear on the screen. The dial is not set to a recording program. Set the program. dial to a recording 27 "SET THE TIME ZONE, DATE AND Time zone, date and time are not set, Set the time zone, date and time. If 26 TIME" appears on the screen. or the built-in rechargeable lithium necessary, power the camcorder battery is exhausted. with the compact power adapter and leave it connected with the dial set to OFF for at least 24 hours to recharge the built-in battery before making the settings. Pressing the start/stop button will not start recording. Cassette is not loaded. The dial is not set to a recording program. Load a cassette. 23 Set the dial to a recording 27 program. The lock switch is set to prevent the Slide the lock switch to the left to 28 operation of the controls on the enable the operation of the carrying carrying handle. handle controls. Camcorder will not focus. Autofocus does not work on that Focus manually. 36 subject. Viewfinder is not adjusted. Adjust the viewfinder with the 18 dioptric adjustment lever. Lens is dirty. Clean the lens. 146 The tally lamp will not light up. The tally lamp option in the customized Set the [TALLY LAMP] setting to 89 functions is set to [02 OFF]. [ON] or [BLINK]. 152