Canon 1629B001 XH G1 XH A1 Instruction Manual - Page 46
Setting the User Bit
![]() |
UPC - 013803071771
View all Canon 1629B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Setting the User Bit The user bit display can be selected from the date or the time of recording, or an identification code consisting of 8 characters in the hexadecimal system that is useful for labeling tapes. There are sixteen possible characters: the numbers 0 to 9 and the letters A to F. If a user bit is being received along with an external time code, you can also choose to record the external user bit on tape. MENU ( 25) RECORDING SETUP UB SELECT•••00 00 00 00 1. Open the menu and select [RECORDING SETUP]. Select [UB SELECT], select a setting option and press the SELECT/SET dial. If you selected [00 00 00 00], the user bit set/reset options appear; continue with the procedure below. Otherwise, close the menu. If you selected [00 00 00 00]: 2. Select [SET]. The first character of the user bit flashes. 3. Turn the SELECT/SET dial to select a number or letter and press the dial. The next character of the user bit starts flashing. Set the rest of the user bit in the same way. 4. Close the menu. To reset the user bit to [00 00 00 00], select [CLEAR] in step 2. The user bit can be recorded when recording with the camcorder or from analog devices. The user bit set in the camcorder cannot be recorded when recording from digital devices (DV or HDV). Displaying the User Bit MENU ( 25) DISPLAY SETUP/ UB DISPLAY•OFF Open the menu and select [DISPLAY SETUP/ close the menu. ]. Select [UB DISPLAY], set it to [ON] and Recording an External User Bit MENU ( 25) RECORDING SETUP UB REC•••INT.USR-BIT Open the menu and select [RECORDING SETUP]. Select [UB REC], select [EXT.USR-BIT] and close the menu. 46
![](/manual_guide/products/canon-xh-a1-xh-g1-xh-a1-instruction-manual-5ff55bc/46.png)