Canon 1629B001 XH G1 XH A1 Instruction Manual - Page 99
Connection to a Normal TV or Monitor Non-HDTV/HiVision
UPC - 013803071771
View all Canon 1629B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
• If necessary, turn on the DV conversion and select whether to convert a tape recorded in HD to SD with the following procedure. Open the menu and select [SIGNAL SETUP]. Select [HD DOWN-CONV], select a setting option and close the menu. E 4 Using the VIDEO Terminal If connecting to a TV, set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE. Refer also to the instruction manual of the TV or VCR. Open the terminal cover To use the A/V terminal, set the video output selection switch to A/V1. To use the BNC teminal (VIDEO2), set it to V2. Signal flow STV-290N Stereo Cable (supplied) INPUT yellow white VIDEO L red AUDIO R We recommend powering the camcorder from a household power outlet. Connection to a Normal TV or Monitor (Non-HDTV/HiVision) 1 Using the COMPONENT OUT Terminal Refer to the connection diagram in the previous section ( 98). Select the appropriate component video signal depending on the TV or monitor you connect. Open the menu and select [SIGNAL SETUP]. Select [COMP. OUT], select a setting option and close the menu. 2 Using the VIDEO Terminal Refer to the connection diagram in the previous section ( 99). If connecting to a TV set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE. Refer also to the instruction manual of the TV or VCR. If connecting to a TV set with a 4:3 aspect ratio, change the [LETTERBOX] setting appropriately. Open the menu and select [SIGNAL SETUP]. Select [LETTERBOX], set it to [ON] and close the menu. We recommend powering the camcorder from a household power outlet. 99 Playback