Canon 1629B001 XH G1 XH A1 Instruction Manual - Page 77

[PED] Master Pedestal Adjust the master pedestal level in the range -9 to +9. E [SET] Setup Level Adjust the setup level in the range -9 to +9. • Depending on the value set for the master pedestal [PED], the setup level may not be able to take a negative value. In that case, adjusting the setup value within a certain value range will have no effect. [SHP] Sharpness Adjust the sharpness level in the range -9 to +9. [HDF] Horizontal Detail Frequency You can select from [HIGH], [MIDDLE] or [LOW]. [DHV] Horizontal/Vertical Detail Balance Adjust the horizontal/vertical detail balance in the range -9 (only horizontal) to +9 (only vertical). [COR] Coring Adjust the detail noise level in the range -9 to +9. [NR1] Noise Reduction 1 You can select from [OFF], [HIGH], [MIDDLE] or [LOW]. • With the [HIGH] setting moving subjects may leave a trailing afterimage. • When picture noise is already low due to the gain settings, the noise reduction function may not be noticeable. [NR2] Noise Reduction 2 Results in an effect similar to applying the skin detail function over the whole picture. You can select from [OFF], [HIGH], [MIDDLE] or [LOW]. • Unlike with the NR1 setting, a trailing afterimage will not appear. [CMX] Color Matrix You can select from [NORMAL], [CINE1] or [CINE2]. [CGN] Color Gain Adjust the color saturation level in the range -50 to +50. 77 Customization