Canon 455X RE-455X_manual.pdf - Page 32

Storing 1 Put the lens cap to the lens. NOTICE Be sure to turn the power OFF before storing the unit. 2 Direct the camera head sideways until it stops. 3 Hold the arm with your right hand and press the arm lock release lever, then pull the arm down to the document table very carefully. NOTICE Make sure to hold the arm when stowing it. If the arm is stowed without being held, the arm jumps up and may result in injury or malfunction. Please stow it slowly. Arm lock release lever 4 Fold the pair of illumination lamps very carefully. Fold the left-hand illumination lamp first, then the right-hand illumination lamp CAUTION Do not touch the fluorescent lamps after the illumination lamps are turned off, as they may still be hot. ባ ቢ Put the supplied unit cover on the RE-455X when the unit is not in use. The unit cover has a pocket to store cords. CAUTION • Make sure the unit has adequately cooled off before putting on the cover. • Place the unit horizontally when storing it. If the unit is stored vertically, it may fall down, resulting in injury or malfunction. • To carry the unit, turn the power OFF, disconnect the cords, fold the unit, and pull out the carrying handle. 9