Canon 455X RE-455X_manual.pdf - Page 34
Operation
UPC - 013803049718
View all Canon 455X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3 OPERATION 1 Turn the power ON. POWER When the power of the RE-455X is turned ON, the POWER indicator on the operation panel lights up. • When the power is turned on, it takes about 20 seconds to show an image. • When the power is turned on, white balance and focus are automatically adjusted. Power switch Operation Panel 2 Turn ON the power source of the other equipment to be used. Either the power of the RE-455X or other equipment may be turned on first. 3 Put the document at the center of the document table. If no image is displayed, check to see that the lens cap has been removed. Document table 4 Focusing. Auto focus will activate when the power is turned ON. If auto focus does not bring the subject into focus, switch to manual focus. 5 When operation is completed, turn the power OFF. POWER The POWER indicator goes off. The illumination lamps will go off (if they are on). Also turn OFF the power of other equipment. NOTICE After turning the power OFF, wait at least 5 seconds before turning the power ON again. Turning the power ON too soon may cause a malfunction. The power of the RE-455X should be turned OFF when the unit is not used. Disconnect the power cord if the unit will not be used for extended periods. 11