Canon BJC 50 Service Manual - Page 146
Canon BJC 50 - Color Inkjet Printer Manual
![]() |
View all Canon BJC 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Part 5: Maintenance BJC-50 5. Several measures may be described in the error condition diagnosis and error recovery. They are shown in each step to be done to solve the problem. Do a test print after completing each step to make sure the problem has been eliminated. If it persists, go to the next step. Example 2 After replacing the control board in step 1, carry out a test print to make sure the problem has been solved. If it still persists, go to step 2 and replace the print unit. Remove and reinstall the battery Is an error displayed? Yes No END 1. Replace the control board. 2. Replace the print unit. • The recharging circuit is defective. • The battery installation part is defective. 6. After troubleshooting, make sure that all the connectors have been plugged back in correctly and that all the screws are tight. When replacing the control board, check the quantity of waste ink absorbed in the waste ink absorber in the printer base unit, and reset the quantity of waste ink absorbed in the EEPROM. See Part 3: 3.6 EEPROM Data Setting (page 3-23). 5-6
![](/manual_guide/products/canon-bjc-50-service-manual-11e5276/146.png)