Canon BJC 50 Service Manual - Page 73

BJC-50 3.2 Function Setting Part 3: Operating Instructions Each printer function settings are set from the host computer using the printer setup utility in an exclusive Windows compatible driver. 3.2.1 Default setting The default setting can be set by button operation when the power is turned on. When the printer is turned on, hold down the POWER button until the beeper sounds the specified number of times. To select one of the default settings, release the POWER button. Release the POWER button after seven beeper sounds to display Table 1 with a list of the default setting modes. TABLE 3-2 FUNCTION SETTING (1) Mode Table 1 Table 2 Table 3 Table 4 Table 5 Beeper 7 times 8 times 9 times 10 times 11 times Remark Factory default setting ( for USA LV model) Factory default setting ( for HV model) TABLE 3-3 FUNCTION SETTING (2) Table 1 Table 2 Table 3 Table 4 Table 5 Operation Mode change LQ BJ LQ BJ BJ Print Mode HQ HQ HQ HQ HQ Reduction Mode 1/1 1/1 1/1 1/1 1/1 Font Roman Courier Roman Courier Courier A4/Letter LTR LTR A4 A4 A4 Page Length 23 in. 11 in. 23 in. 12 in. 12 in. Taxt scale OFF OFF OFF OFF OFF Smoothing OFF OFF OFF OFF OFF Paper FeedPosition 8.5 mm 3.0 mm 8.5 mm 3.0 mm 3.0 mm Automatic Line Feed CR CR CR CR CR Automatic Power Off ON (30 min) ON (30 min) ON (30 min) ON (30 min) ON (30 min) Font Lock OFF OFF OFF OFF OFF Input/Download Buffer OFF ON OFF OFF OFF Automatic Carriage Return LF LF LF Alternate Graphic Mode OFF OFF OFF International Character Set USA USA Character Set Italic SET 1 Italic SET 1 SET1 Code Page 437 437 437 850 437 OFF OFF OFF OFF OFF Ink Low Warning Auto Emulation Change OFF OFF OFF OFF OFF 3-15