Canon CanoScan D2400UF CanoScan D1230U/D2400U Toolbox2.6 for Win Guide - Page 9

ScanGear Toolbox Functions The Toolbar Scanner Select your scanner. Mode Select whether the scan is performed from the platen (platen mode) or the Film Adapter Unit (film mode). This option will not display with a scanner that does not support a Film Adapter Unit. Link Button Links the driver or application program used by each of the function buttons (p. 29). Easy Scan Button Use these buttons to set the settings for Easy Scan (p. 14). Scan (1-3) Buttons Scans an image and sends it to a linked application program. Save Button Scans an image and saves it to a file. Copy Button Scans an image and sends it to a printer. Mail Button Scans an image and attaches it to a mail message. Fax Button Scans an image and sends it to the fax driver. The following conditions are required for the buttons shown above to display and function. Fax: A fax modem must be connected and its software installed. Mail: A mail program that supports MAPI (p. 22) must be installed. Copy: A printer must be connected and an appropriate driver installed. Scan (1-3): The application programs provided on the CanoScan Setup CD-ROM must be installed. • Images sent to applications are limited to the Color (24 bit), Grayscale (8 bit) or Black and White (1 bit) formats. ScanGear Toolbox does not support the Color (36/42/48 bit) or Grayscale (12/14/16 bit) modes. • In film mode, the fax and mail functions are not available. OCR programs installed from the CanoScan Setup CD-ROM are also not supported in this mode. 9