Canon Color imageCLASS 8180c imageCLASS MF8180c Basic Guide - Page 157
General Problems
View all Canon Color imageCLASS 8180c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
General Problems The machine has no power. Q Is the power cord plugged in securely? A Check that the power cord is plugged securely into the machine and into the wall outlet. Insert the power cord straight into the power socket on the back of the machine. Do not insert it at an angle. Otherwise, the machine may not be properly connected to the power source and may not turn on. If this happens, disconnect the power cord, and reconnect it correctly after a minute or more. (Refer to the Quick Start Guide.) Nothing appears in the LCD. Q Is the power cord plugged in securely? A Check that the power cord is plugged securely into the machine and into the wall outlet. Insert the power cord straight into the power socket on the back of the machine. Do not insert it at an angle. Otherwise, the machine may not be properly connected to the power source and may not turn on. If this happens, disconnect the power cord, and reconnect it correctly after a minute or more. (Refer to the Quick Start Guide.) If the LCD remains blank, unplug the machine and wait approximately 3 minutes to 5 minutes until the temperature inside the machine lowers, then plug it in again. If the LCD remains blank, unplug the 9 machine, and contact Canon Authorized Service Facilities or the Canon Customer Care Center. Q Does the Energy Saver key go off? A When the Energy Saver key lights up, the energy saver mode activates. To restore the machine from the energy saver mode, press [Energy Saver]. Troubleshooting General Problems 9-39