Canon Color imageCLASS 8180c imageCLASS MF8180c Basic Guide - Page 70

1 Press [Menu]. 2 Press [((-)] or [)(+)] to select ➞ press [Set]. 3 Press [((-)] or [)(+)] to select ➞ press [Set]. 4 Press [((-)] or [)(+)] to select the each color , , and ➞ press [Set]. 5 Press [((-)] or [)(+)] or use the numeric keys to specify the toner density ➞ press [Set]. 5 You can specify the level from between 1 and 7. A value of 5 is the default setting. For the toner density indication, 1 is the lightest and 7 is the darkest. Copying NOTE Please refer to the table below when you adjust the color balance setting. When the preview image Change the yellow to lower side, or change the is yellow-looking. magenta and cyan to higher side. When the preview image Change the magenta to lower side, or change the is magenta-looking. yellow and cyan to higher side. When the preview image Change the cyan to lower side, or change the yellow is cyan-looking. and magenta to higher side. When the preview image Change the yellow and magenta to lower side, or is red-looking. change the cyan to higher side. When the preview image Change the yellow and cyan to lower side, or change is green-looking. the magenta to higher side. When the preview image Change the magenta and cyan to lower side, or is blue-looking. change the yellow to higher side. Adjustment on the monotone area have an instant effect on your imaging. Adjusting the Saturation You can adjust saturation to the appropriate level best suited for a document. Three modes are available for adjusting the saturation level. 5-8 Improving Copied Image