Canon Color imageCLASS MF9170c imageCLASS MF9170c/MF9150c/MF8450c Starter Guid - Page 37
Set IP Address Manually, Finish “Setup Guide”
View all Canon Color imageCLASS MF9170c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2 Set Up the Machine Set IP Address Manually This is the setting for the static IP address. If you need to enter the IP address manually or if the machine obtain the IP address automatically but need to configure the setting manually, follow the procedure below. Configure the setting for the IP address manually in the User Mode after finishing the "Setup Guide." In this setting, enter the IP address, subnet mask, and gateway address manually. Press (Main Menu) → → → → → → → → → Enter the IP address → Enter the subnet mask → Enter the gateway address → (Main Menu) to return to the Main Menu screen. → Turn OFF the main power → Restart the machine. For more information on this setting, see "Network Settings," in the e-Manual. Finish "Setup Guide" All the settings with the "Setup Guide" are complete. Follow the procedure below to finish the "Setup Guide." After finishing the "Setup Guide," you need to set up the computer and software for the machine. 1 Make sure the following screen is displayed on the display, then press [OK] to proceed to the "Setup Guide." 2 Press [OK] to finish the "Setup Guide." Make sure the USB cable is not connected to the machine. If it is connected already, disconnect it from the machine. 35