Canon DC320 DC310/DC320 Instruction Manual - Page 26
Inserting and Removing a Disc, LCD Backlight, Inserting the Disc
UPC - 013803091694
View all Canon DC320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
yourself in the picture when recording with the self timer. 180° NOTES • This setting does not affect the brightness of the recording. • Using the bright setting will shorten the effective usage time of the battery pack. Inserting and Removing a Disc Subject can monitor the LCD screen NOTES About the LCD and viewfinder screen: The screens are produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction. LCD Backlight You can set the brightness of the LCD screen to normal or bright. Use only 8 cm (3 in.) mini DVD discs marked with the DVD-R logo (including DVD-R DL) or the DVD-RW logo. Refer also to Discs that have been tested ( 6). Before inserting the disc be sure to check that the recording surface is clean. If necessary, use a soft lens- cleaning cloth to remove any fingerprints, dirt buildup or smudges from the disc surface. Inserting the Disc ( 21) Hold DISP. pressed down for more than 2 seconds. Repeat this action to toggle between the normal and bright settings. Pick up lens 1 Turn the switch to ON to set the camcorder in mode. 2 Slide OPEN fully in the direction of the arrow and gently open the disc cover completely until it stops. 26 • Preparations