Canon DC320 DC310/DC320 Instruction Manual - Page 73
List of Messages, Memory Card Operation
UPC - 013803091694
View all Canon DC320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Cannot edit my recordings or add recordings to the disc with the DVD device. - It may not be possible to edit or add recordings with an external DVD recorder on a disc recorded with this camcorder. Memory Card Operation Memory card cannot be inserted. - Memory card is not facing the correct direction. Turn the memory card over and reinsert it ( 28). Cannot record on the memory card. - Memory card is full. Erase still images ( 55) to free some space or replace the memory card. - Memory card was not initialized. Initialize the memory card ( 59). - The folder and file numbers have reached their maximum value. Set [FILE NOS.] to [RESET] ( 68) and insert a new memory card. - The write-protect switch on an SD or SDHC memory card is set to prevent accidental erasure. Change the position of the write-protect switch. Memory card cannot be played back. - Set the camcorder to mode ( 53). Image cannot be erased. - Image is protected. Cancel the protection ( 58). - The write-protect switch on an SD or SDHC memory card is set to prevent accidental erasure. Change the position of the write-protect switch. appears in red. - A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory card. Initialize the memory card ( 59) if the icon still appears in red. List of Messages List of Messages (in alphabetical order) CANNOT ENTER THE STANDBY MODE NOW - The camcorder cannot enter the Quick Start standby mode ( 32) while the disc is being recognized after it was inserted or if the remaining battery charge is too low. CANNOT PLAY BACK - The disc is dirty or you attempted to play back a disc type not supported by this camcorder (not DVD-R/RW) or a disc that is dirty or scratched. - This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use ( 79). CANNOT READ THE DISC CHECK THE DISC - Disc could not be read. Try cleaning it or replace the disc ( 77). - This message can also appear if the camcorder has exceeded its operational temperature. Turn off the camcorder and let it cool down before resuming use. - This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use ( 79). - The disc may not be loaded correctly. Try removing the disc and reinserting it ( 26). • CANNOT RECORD • CANNOT RECORD CHECK THE DISC - There is a problem with the disc. Replace the disc ( 26). - This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use ( 79). - The disc's recording surface may be dirty or scratched. - This message may appear when the camcorder is repeatedly subject to vibration. Additional Information • 73