Canon DC320 DC310/DC320 Instruction Manual - Page 74

CANNOT USE DISC USE OF A RECOMMENDED DISC IS ADVISED - The disc cannot be used. We recommend that you use a disc that has been tested ( 6). CARD ERROR - A memory card error occurred. The camcorder cannot record or display the image. The error may be temporary. If the message disappears after 4 seconds and appears in red, turn the camcorder off, remove the card and reinsert the card. If changes to green, you can resume recording/ playback. CARD FULL - Memory card is full. Erase some images ( 55) to free some space or replace the memory card. CHANGE THE BATTERY PACK - Battery pack is exhausted. Replace or charge the battery pack ( 18). DISC ACCESS FAILURE CHECK THE DISC - There was an error when reading the disc or attempting to write onto it. Try cleaning the disc or replace it ( 77). - This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use ( 79). - The disc may not be loaded correctly. Try removing the disc and reinserting it ( 26). DISC COVER IS OPEN - Verify the disc is correctly inserted and close the disc cover ( 26). DISC FULL - The disc is full (" END" appears on the screen). Delete some recordings (DVD-RW in VR mode) to free some space ( 36) or replace the disc. DISC IS FINALIZED CANNOT RECORD - You cannot record additional scenes on a finalized DVD-R/DVD-R DL disc. - You cannot record additional scenes or unfinalize a DVD-RW disc in VIDEO 74 • Additional Information mode that was finalized with another digital device. DISC MUST BE FINALIZED TO PLAY BACK IN COMPATIBLE PLAYERS - Be sure to finalize the disc and check the compatibility of the device before playing back the disc on external DVD devices ( 48). LOADING THE DISC - The disc is being read. Wait before you start recording. NAMING ERROR - The folder and file numbers have reached their maximum value. Set the [FILE NOS.] option to [RESET] and erase all the images on the memory card ( 55) or initialize it ( 59). NO CARD - There is no memory card in the camcorder ( 28). NO DISC - No disc is loaded. Insert a disc ( 26). - This message can also appear if condensation has formed. Wait until the camcorder dries completely before resuming use ( 79). NO IMAGES - No images are recorded on the memory card. PRINT ORDER ERROR - You attempted to set more than 998 still images in the print order ( 60). REACHED THE MAXIMUM NUMBER OF SCENES - The maximum number of scenes has been reached. Delete some recordings (DVD-RW in VR mode) to free some space ( 36) or replace the disc. RECOVERING DATA PLEASE WAIT... - Data on the disc is being recovered. Wait until this message disappears before resuming use. TASK IN PROGRESS DO NOT DISCONNECT THE POWER SOURCE - The camcorder is updating important file allocation data on the disc. Do not disconnect the compact power adapter or remove the battery pack.