Canon DC320 DC310/DC320 Instruction Manual - Page 72

Viewfinder picture is blurred. - Adjust the viewfinder with the dioptric adjustment lever ( 30). Playback/Editing Playback does not start. - Load a disc ( 26). - Set the camcorder to mode ( 34). - You may not be able to play with this camcorder, discs recorded or edited with other DVD recorders or computer DVD drives. - If using a single-sided disc, check that the disc is inserted with the label side facing up. - The camcorder has exceeded its operational temperature. Turn off the camcorder and let it cool down before resuming use. • During playback there is video noise and the sound is distorted. • The disc cannot be read. - The disc is dirty. Clean the disc with a soft lens-cleaning cloth ( 77). - You may not be able to play with this camcorder, discs recorded or edited with other DVD recorders or computer DVD drives. Cannot add scenes to the playlist. - The disc is full (" END" appears on the screen). Delete some recordings to free some space ( 36). - You cannot add more than 999 scenes to the playlist. Cannot divide the scene. - You cannot edit or delete scenes on a disc that was recorded in another digital device. - You cannot divide the scene if there are already 999 scenes on the disc. - You cannot divide original scenes. - You cannot divide the scene if it is too short (2 seconds or less). Cannot edit the disc title. - You cannot add a title to a DVD-R/DVDR DL disc after it was finalized ( 48). - Unfinalize ( 49) the disc first (DVDRW in VIDEO mode). - You may not be able to edit the title if you entered it with another digital device. Cannot edit or delete scenes. - You cannot edit or delete scenes on a disc that was protected with another digital device. - Scenes cannot be deleted in a DVD-R/ DVD-R DL disc or a DVD-RW disc recorded in VIDEO mode. Cannot finalize the disc. - The camcorder has exceeded its operational temperature. Turn off the camcorder and let it cool down before resuming use. - When using a battery pack, make sure it is fully charged. No sound from the built-in speaker. - Open the LCD panel. - Speaker volume is turned off. Adjust the volume with the [SPEAKER VOL.] setting ( 35). Playing Back the Disc in an External DVD Device There is a brief stop between scenes. - Depending on the DVD player, there might be a very short stop between scenes during playback. Disc is running, but image will not appear on the TV screen. - The video input on the TV is not set to the video terminal to which you connected the camcorder. Select the correct video input. - You attempted to play back an incompatible disc. Stop playback. The disc cannot be recognized by the device. Or, even though the disc is read, cannot play back the disc or the picture is distorted. - The disc is dirty. Clean the disc with a soft lens-cleaning cloth ( 77). - Finalize the disc using the camcorder ( 48). - DVD-RW discs in VR mode can only be played back with VR mode-compatible DVD players. Refer to the instruction manual of your DVD device. 72 • Additional Information