Canon DC320 DC310/DC320 Instruction Manual - Page 58

Histogram and Other Screen Displays When viewing still images you can display the histogram and the icons of all the functions used at the time of recording. Use the histogram as a reference to verify the correct exposure of the still image. The area to the right of the histogram represents highlights and the left side represents shadows. A still image whose histogram skews to the right is relatively bright; while one whose histogram peaks to the left, is relatively dark. Pixel Count Shadows Highlights • All displays off 1 However, the markers and the icon and AF frames when the autofocus is locked will still appear on the screen. Protecting Photos You can protect still images recorded on the memory card from accidental erasure. ( 21) FUNC. ( 22) FUNC. [ PROTECT] Press [ PROTECT]: The image selection screen appears. NOTES The histogram will appear also after recording a still image, while reviewing it within the time set for the [REVIEW] option (or immediately after recording it, if [REVIEW] is set to [ OFF]). You can choose to turn off the histogram by pressing DISP. . TO SELECT THE ON-SCREEN DISPLAYS Repeatedly press DISP. to turn the onscreen displays on and off in the following sequence. • All displays on • All displays off1 • All displays on • Regular displays only (removes the histogram and information icons) FROM THE IMAGE SELECTION SCREEN 1 Select ( ) the still image you want to protect. 2 Press to protect the still image. appears on the bottom bar and the image cannot be erased. Press again to cancel the image protection. 3 Repeat steps 1-2 to protect additional images or press FUNC. twice to close the menu. IMPORTANT Initializing the memory card ( 59) will permanently erase all recorded still images, even the protected ones. 58 • Photos