Canon EOS RP Advanced User Guide - Page 168
Merging Multiple Exposures with an Image Recorded on the, Select [Select image for multi.
View all Canon EOS RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Multiple Exposures Merging Multiple Exposures with an Image Recorded on the Card You can select a RAW image recorded on the card as the first single exposure. The image data of the selected RAW image will remain intact. Only 1 or F images can be used. JPEG images cannot be selected. Images you can specify also vary depending on the lens attached. For details, see the table below. 1 Select [Select image for multi. expo.]. 2 Select the first image. zz Use the keys to select the first image, then press . zz Select [OK]. ggThe file number of the selected image will be displayed at the bottom of the screen. 3 Take the picture. zz When you select the first image, the number of remaining exposures as set with [No. of exposures] will decrease by 1. zzImages You Can Select Lens Attached RF/ EF lens EF-S lens Cropped Shooting Off On - Selectable Images RAW images captured at full size RAW images from cropped shooting or taken with an EF-S lens ooThese images cannot be selected as the first single exposure: Images captured with [z: Highlight tone priority] set to [Enable] or [Enhanced], or images captured with [z: zCropping/aspect ratio] not set to [Full-frame] or [1.6x (crop)]. oo[Disable] is applied for [z: Lens aberration correction] and [z: Auto Lighting Optimizer] regardless of the settings of the image selected as the first single exposure. 168