Canon EOS RP Advanced User Guide - Page 501

Responding to Error Messages 11: Connection target not found zz In the case of [q], is Camera Connect running? ggEstablish a connection using Camera Connect (=435). zz In the case of [l], is the power of the printer on? ggTurn on the printer. zz In the case of [D], is the EOS software running? ggStart the EOS software and reestablish the connection (=455). zz Are the camera and the access point set to use the same password for authentication? ggThis error occurs if the passwords do not match when the authentication method for encryption is set to [Open system]. The setting is case-sensitive, so check upper- and lower-case characters. Make sure that the correct password for authentication is set on the camera (=517). 12: Connection target not found zz Is the power of the target device and access point on? ggTurn on the target device and access point, then wait a while. If a connection still cannot be established, perform the procedures to establish the connection again. 501