Canon EOS RP Advanced User Guide - Page 43
Open the card slot/battery, compartment cover., Remove the battery., Close the cover., Removal
View all Canon EOS RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Inserting/Removing the Battery and Card ooYou cannot use batteries other than the Battery Pack LP-E17. ooAfter opening the card slot/battery compartment cover, be careful not to swing it back any further. Otherwise, the hinge may break. Removal 1 Open the card slot/battery compartment cover. zz Set the power switch to . zz Check that the access lamp (1) is off, then open the cover. zz If [Saving...] is displayed on the screen, (1) close the cover. 2 Remove the battery. zz Press the battery lock lever as shown by the arrow and remove the battery. zz To prevent short-circuits, always attach the included protective cover (=40) to the battery. 3 Remove the card. zz Gently push in the card, then let it go to eject. zz Pull the card straight out. 4 Close the cover. zz Press the cover until it snaps shut. 43