Canon EOS RP Advanced User Guide - Page 270
Shutter btn, function for movies], Interval], Auto exposure], frame]
View all Canon EOS RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
Recording Time-lapse Movies ooDo not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera's internal components. ooTime-lapse movies cannot be recorded when the camera is connected to a computer with the interface cable, or when an HDMI cable is connected. ooMovie Servo AF will not function. ooIf the shutter speed is 1/30 sec. or slower, the exposure of the movie may not be displayed properly (may differ from that of the resulting movie). ooDo not zoom the lens during time-lapse movie recording. Zooming the lens may cause the image to be out of focus, the exposure to change, or the lens aberration correction not to function properly. ooWhen recording a time-lapse movie under a flickering light, noticeable image flickering, horizontal stripes (noise), or irregular exposures may be recorded. ooImages that are displayed while time-lapse movies are being recorded may look different from the resulting movie. (For example, there may be inconsistent brightness from flickering light sources, or noise from a high ISO speed.) ooWhen recording a time-lapse movie under low light, the image displayed during shooting may look different from what is actually recorded in the movie. In such cases, the icon will blink. ooIf you move the camera from left to right (panning) or shoot a moving subject during time-lapse movie recording, the image may look extremely distorted. ooDuring time-lapse movie recording, auto power off will not take effect. Also, you cannot adjust the shooting function and menu function settings, play back images, etc. ooSound is not recorded for time-lapse movies. ooWith time-lapse movie recording, you can press the shutter button completely to start or stop the movie recording regardless of the [5: Shutter btn function for movies] setting. ooWith [Interval] set to less than 3 sec. and [Auto exposure] set to [Each frame], if the brightness differs greatly from the preceding shot, the camera may not shoot at the set interval. 270