Canon FS300 FS30/FS31/FS300 Instruction Manual - Page 59
Viewing Photos
View all Canon FS300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Basic Playback Viewing Photos ( 24) When the camera mode dial is set to or : 1 Press . • Even if the camcorder is off, pressing will turn on the camcorder in playback mode. • The original movies index screen appears after a few seconds. 2 Move ( ) the orange selection frame to the tabs on the top of the screen. 3 Select ( ) the tab that contains the photos you want to play back. • / You can switch between the photos recorded in the built-in memory and those recorded on the memory card. Refer to Selecting What Recordings to Play Back ( 37). 4 Return ( ) to the index screen. 5 Select ( , ) a photo. • Move the orange selection frame to the photo you want to view. • Push the joystick ( ) to extend the selection frame and browse ( ) through whole index pages. Push the joystick ( ) to return to the index screen. 6 Press . The index screen closes and the selected photo is displayed. 7 Push the joystick ( ) to move between images. Push the joystick ( ) and hold it down to run quickly through the photos. When the camera mode dial is set to : 1 Press . • Even if the camcorder is off, pressing will turn on the camcorder in playback mode. • The last photo recorded will appear. 2 Push the joystick ( ) to move between photos. Push the joystick ( ) and hold it down to run quickly through the photos. Photo Jump Function When you have recorded a large number of photos, you can jump 10 or 100 photos at a time. 59